Tex. Water Code § 26.451

In this subchapter:

(1), (2) Repealed by Acts 2001, 77th Leg., ch. 880, Sec. 25(1), eff. Sept. 1, 2001.

(3) "Critical junctures" means, in the case of an installation, repair, or removal, all of the following steps:

(A) preparation of the tank bedding immediately before receiving the tank;

(B) setting of the tank and the piping, including placement of any anchoring devices, backfill to the level of the tank, and strapping, if any;

(C) connection of piping systems to the tank;

(D) all pressure testing of the underground storage tank, including associated piping, performed during the installation;

(E) completion of backfill and filling of the excavation;

(F) any time during the repair in which the piping system is connected or reconnected to the tank;

(G) any time during the repair in which the tank or its associated piping is tested; and

(H) any time during the removal of the tank.

(4) "Installation" means the installation of underground storage tanks and ancillary equipment.

(5) to (10) Repealed by Acts 2001, 77th Leg., ch. 880, Sec. 25(1), eff. Sept. 1, 2001.

(11) "Removal" means the process of removing and disposing of an underground storage tank that is no longer in service, or the process of abandoning an underground storage tank in place after purging the tank of vapors and filling the vessel of the tank with an inert material.

(12) "Repair" means the modification or correction of an underground storage tank and ancillary equipment. The term does not include:

(A) relining an underground storage tank through the application of epoxy resins or similar materials;

(B) the performance of a tightness test to ascertain the integrity of the tank;

(C) the maintenance and inspection of cathodic protection devices by a corrosion expert or corrosion technician;

(D) emergency actions to halt or prevent leaks or ruptures; or

(E) minor maintenance on ancillary aboveground equipment.

(13), (14) Repealed by Acts 2001, 77th Leg., ch. 880, Sec. 25(1), eff. Sept. 1, 2001.