Ark. Code Ann. § 15-4-2405
This is the official text of Ark. Code Ann. § 15-4-2405, part of Arkansas’s Code Ann — part of the compiled statutory law of Arkansas, published by the state as "Code Ann." Browse the sections below, each linked to its official government source.
Not legal advice. This page reproduces the official text of a government statute for reference only. Laws change, and how a statute applies depends on your specific facts. For advice about your situation, consult a licensed attorney in your state.
Extension of recycling tax credit - Postconsumer waste
Official statutory text
(a) (1) A qualified manufacturer of steel which has been certified by the Executive Director of the Arkansas Economic Development Commission after January 1, 2001, and prior to December 31, 2006, as qualifying for the benefits of this subchapter and has qualified for the income tax credit for the purchase of waste reduction, reuse, or recycling equipment provided by § 26-51-506 , may carry forward any unused income tax credit earned under § 26-51-506 for a period of fourteen (14) consecutive years following the taxable year in which the credit originated. (2) Income tax credits which would otherwise expire during that period shall first be used. (b) In the case of a qualified manufacturer of steel as described in subsection (a) of this section: (1) The term "waste reduction, reuse, or recycling equipment" as defined in § 26-51-506 shall include production, processing, and testing equipment used to manufacture products containing recovered materials; and (2) (A) The provisions of § 26-51-506(d)(4) shall not apply. (B) However, the qualified manufacturer of steel shall make a good faith effort to use recovered materials containing Arkansas post-consumer waste as a part of the materials used. Acts 2001, No. 541, § 5.
(a) (1) A qualified manufacturer of steel which has been certified by the Executive Director of the Arkansas Economic Development Commission after January 1, 2001, and prior to December 31, 2006, as qualifying for the benefits of this subchapter and has qualified for the income tax credit for the purchase of waste reduction, reuse, or recycling equipment provided by § 26-51-506 , may carry forward any unused income tax credit earned under § 26-51-506 for a period of fourteen (14) consecutive years following the taxable year in which the credit originated. (2) Income tax credits which would otherwise expire during that period shall first be used.
(1) A qualified manufacturer of steel which has been certified by the Executive Director of the Arkansas Economic Development Commission after January 1, 2001, and prior to December 31, 2006, as qualifying for the benefits of this subchapter and has qualified for the income tax credit for the purchase of waste reduction, reuse, or recycling equipment provided by § 26-51-506 , may carry forward any unused income tax credit earned under § 26-51-506 for a period of fourteen (14) consecutive years following the taxable year in which the credit originated.
(2) Income tax credits which would otherwise expire during that period shall first be used.
(b) In the case of a qualified manufacturer of steel as described in subsection (a) of this section: (1) The term "waste reduction, reuse, or recycling equipment" as defined in § 26-51-506 shall include production, processing, and testing equipment used to manufacture products containing recovered materials; and (2) (A) The provisions of § 26-51-506(d)(4) shall not apply. (B) However, the qualified manufacturer of steel shall make a good faith effort to use recovered materials containing Arkansas post-consumer waste as a part of the materials used.
(1) The term "waste reduction, reuse, or recycling equipment" as defined in § 26-51-506 shall include production, processing, and testing equipment used to manufacture products containing recovered materials; and
(2) (A) The provisions of § 26-51-506(d)(4) shall not apply. (B) However, the qualified manufacturer of steel shall make a good faith effort to use recovered materials containing Arkansas post-consumer waste as a part of the materials used.
(A) The provisions of § 26-51-506(d)(4) shall not apply.
(B) However, the qualified manufacturer of steel shall make a good faith effort to use recovered materials containing Arkansas post-consumer waste as a part of the materials used.
Acts 2001, No. 541, § 5.
(a) (1) A qualified manufacturer of steel which has been certified by the Executive Director of the Arkansas Economic Development Commission after January 1, 2001, and prior to December 31, 2006, as qualifying for the benefits of this subchapter and has qualified for the income tax credit for the purchase of waste reduction, reuse, or recycling equipment provided by § 26-51-506 , may carry forward any unused income tax credit earned under § 26-51-506 for a period of fourteen (14) consecutive years following the taxable year in which the credit originated. (2) Income tax credits which would otherwise expire during that period shall first be used.
(1) A qualified manufacturer of steel which has been certified by the Executive Director of the Arkansas Economic Development Commission after January 1, 2001, and prior to December 31, 2006, as qualifying for the benefits of this subchapter and has qualified for the income tax credit for the purchase of waste reduction, reuse, or recycling equipment provided by § 26-51-506 , may carry forward any unused income tax credit earned under § 26-51-506 for a period of fourteen (14) consecutive years following the taxable year in which the credit originated.
(2) Income tax credits which would otherwise expire during that period shall first be used.
(b) In the case of a qualified manufacturer of steel as described in subsection (a) of this section: (1) The term "waste reduction, reuse, or recycling equipment" as defined in § 26-51-506 shall include production, processing, and testing equipment used to manufacture products containing recovered materials; and (2) (A) The provisions of § 26-51-506(d)(4) shall not apply. (B) However, the qualified manufacturer of steel shall make a good faith effort to use recovered materials containing Arkansas post-consumer waste as a part of the materials used.
(1) The term "waste reduction, reuse, or recycling equipment" as defined in § 26-51-506 shall include production, processing, and testing equipment used to manufacture products containing recovered materials; and
(2) (A) The provisions of § 26-51-506(d)(4) shall not apply. (B) However, the qualified manufacturer of steel shall make a good faith effort to use recovered materials containing Arkansas post-consumer waste as a part of the materials used.
(A) The provisions of § 26-51-506(d)(4) shall not apply.
(B) However, the qualified manufacturer of steel shall make a good faith effort to use recovered materials containing Arkansas post-consumer waste as a part of the materials used.
Acts 2001, No. 541, § 5.
Status: in_force
Need a lawyer in Arkansas?
Find a Arkansas lawyer
About this page: Statute text is reproduced from official government publishers via the
Open US Law dataset
(Vaquill AI, snapshot v2026.08, CC BY 4.0). Primary legislative text like this is public domain under the government-edicts doctrine
(Georgia v. Public.Resource.Org, 2020). We link every section back to its official source so you can verify it independently.