Tex. Property Code § 92.154
This is the official text of Tex. Property Code § 92.154, part of Texas’s Property Code — governs real property, landlord-tenant law, and property transactions.
Not legal advice. This page reproduces the official text of a government statute for reference only. Laws change, and how a statute applies depends on your specific facts. For advice about your situation, consult a licensed attorney in your state.
§ 92.154. HEIGHT, STRIKE PLATE, AND THROW REQUIREMENTS--KEYED DEAD BOLT OR KEYLESS BOLTING DEVICE.
Official statutory text
(a) A keyed dead bolt or a keyless bolting device required by this subchapter must be installed at a height:
(1) not lower than 36 inches from the floor; and
(2) not higher than:
(A) 54 inches from the floor, if installed before September 1, 1993; or
(B) 48 inches from the floor, if installed on or after September 1, 1993.
(b) A keyed dead bolt or a keyless bolting device described in Section 92.151(6)(A) or (B) in a dwelling must:
(1) have a strike plate screwed into the portion of the doorjamb surface that faces the edge of the door when the door is closed; or
(2) be installed in a door with a metal doorjamb that serves as the strike plate.
(c) A keyed dead bolt or keyless dead bolt, as described by Section 92.151(6)(A), installed in a dwelling on or after September 1, 1993, must have a bolt with a throw of not less than one inch.
(d) The requirements of this section do not apply to a keyed dead bolt or a keyless bolting device in one door of a pair of French doors that is installed in accordance with the requirements of Section 92.153(b)(1) or (2).
(1) not lower than 36 inches from the floor; and
(2) not higher than:
(A) 54 inches from the floor, if installed before September 1, 1993; or
(B) 48 inches from the floor, if installed on or after September 1, 1993.
(b) A keyed dead bolt or a keyless bolting device described in Section 92.151(6)(A) or (B) in a dwelling must:
(1) have a strike plate screwed into the portion of the doorjamb surface that faces the edge of the door when the door is closed; or
(2) be installed in a door with a metal doorjamb that serves as the strike plate.
(c) A keyed dead bolt or keyless dead bolt, as described by Section 92.151(6)(A), installed in a dwelling on or after September 1, 1993, must have a bolt with a throw of not less than one inch.
(d) The requirements of this section do not apply to a keyed dead bolt or a keyless bolting device in one door of a pair of French doors that is installed in accordance with the requirements of Section 92.153(b)(1) or (2).
Status: in_force · Read it on the official government site
Dealing with a real estate matter in Texas?
See all Texas Real Estate lawyers
About this page: Statute text is reproduced from official government publishers via the
Open US Law dataset
(Vaquill AI, snapshot v2026.08, CC BY 4.0). Primary legislative text like this is public domain under the government-edicts doctrine
(Georgia v. Public.Resource.Org, 2020). We link every section back to its official source so you can verify it independently.